Opens in a new tab

Machine Control Models & Earthwork Takeoffs in Arkansas

TCL Consulting builds earthwork takeoffs and 3D machine control models from an office in Papillion, Nebraska, and ships them to Arkansas contractors over the internet. A grading crew in Bentonville, a utility contractor in Little Rock and a site crew in Jonesboro all get the same files the same way. No office in the state, no truck to wait on, just people who answer the phone and know what a plan set is supposed to contain.

Quantities for Ozark Rock and Delta Gumbo Alike

Arkansas changes under your tracks. Northwest Arkansas sits on Ozark limestone and chert, the Ouachitas run to shale and sandstone, and the Delta in the east is deep silt and gumbo clay that pumps when it is wet. A takeoff has to separate rock from dirt and usable fill from waste, or the number is wrong before the first load. We break the quantities out that way and show you how we got there.

Machine Control Files for Warehouse Pads and Subdivisions

The I-49 corridor from Fayetteville to Bentonville keeps adding subdivisions, distribution buildings and corporate campuses, while Little Rock, Fort Smith and the steel towns along the Mississippi River put out industrial pads and plant expansions. We turn the engineer's CAD into finish grade, subgrade and over-ex surfaces, plus curb, pavement and utility linework, in whatever format your machine control platform reads. The file arrives checked against the plan set, not just exported from it.

Remote GPS Support on Central Time, Same as You

Arkansas runs on Central time and so do we, Monday through Friday, 7 to 5. Saturdays we answer 7 to noon Central. When a surface will not load in Conway or the rover reads a foot off in Rogers, call and we connect to your data collector and work the problem while you watch. No service trip is coming, and none is needed. Field control and localization stay with your crew.

"A split-screen image showcasing construction machine control technology: on the left, a bulldozer leveling soil at a construction site under a clear sky; in the center, a digital display showing real-time 3D terrain data for machine control; on the right, an excavator performing precise grading work in a similar outdoor setting."

Why Arkansas Contractors Work With TCL

Based in Papillion, Nebraska, in the civil industry since 2013

Cut, fill and rock broken out so the bid adds up

Flat takeoff rates by site size, no hourly surprises

Files that have run on projects in 42 of 50 states

Contact Us

Working dirt in Arkansas? Send the plans and CAD and we come back with a price and the questions the documents raise, usually the same ones your estimator would ask. Call (402) 708-1577 or use the form below.

Common Questions

Turnaround depends on the size of the plan set and how clean the CAD is, and we give you a delivery date when we quote the job. The document review happens first, so if a Little Rock set is missing a grading sheet you hear about it on day one instead of day four. When a letting date will not move, rush delivery in 48 hours or less is available and adds 20% to the price. Say so when you send the files and we plan the week around it.

Yes, because nothing physical is shipped. You send plans and CAD through our form or email, we build in Nebraska, and the finished surfaces and reports download to your office or your field tablet. Texarkana, Harrison and West Memphis are the same distance from us, which is none. What stays with your crew is the field side: setting control, localizing the GPS system to the site and checking the surface against known points before grading. We do not visit sites and do not do field calibration, and we say so up front.

For a takeoff, a complete PDF set usually works. For a 3D model it does not; PDFs lose the elevations and geometry a machine needs, so we need the engineer’s CAD or surface files, alignments for roadway work and your control data. Every job starts with a read of the full package. On Ozark sites that review often catches rock lines or over-ex limits that the grading plan assumes but never shows, and on Delta sites it is usually the undercut depth. We send the questions to you before building, not after.

Revisions are routine and priced as routine. Send the revised sheets or CAD and we compare them to the model your crew is already running, rebuild only what changed and send a plain note on where the grade moved and by how much. Arkansas DOT work and the fast-moving subdivision jobs around Bentonville revise often, so we keep every project’s source files organized and ready to update, and the revised surface goes back with the same checks the original got.

Takeoffs are flat rate by site size: $249 up to 1 acre, $499 for 1-10 acres, $895 for 10-20 acres, and $1,349 for 20 acres and up or heavy civil. Machine control models are priced by the acre; the calculator on our pricing page gives you the number in seconds. 2D linework is $495 flat. Storm, utility, highway and specialty scopes, which covers most ARDOT and river port work, are quoted before production. There are no discounts or volume deals; the price you see is the price everyone pays.